- Product Details
一、Conductive Rubber Type
 |  |  |  |
| YP (double sides spong） | YP (double sides spong） | YDP (single side spong) | YS (transparentsandwiching) |
 |  |  |  |
| YL (four sides conducting) | YY ( printing ) | Painting on both sides type | Blue strip |
二、Conductive Rubber physical dimension drawing
 |  |
transparent samdwich strip（YS）
Remark：both sides are transparent glue layer,the middle is conduit layer
 |  |
Conductive Rubber（YL）
Remark：conduit around sides
 |  |
Froth Strip（YP）
Remark: both sides are frogh layer(or red glue layer), the middle is conduit layer
三 、Conductive Rubber Appliancion
 |  |
Application Methods of Conductive Rubber:
·Using this connection method, one structure piece is needed to fix LCD, Conductive Rubber and PCB together.
·Because the spacing between electrodes can be made most small, it is suitable for products which have many drive routes.
·Product Advantages: cheap in price to help bring down the cost; flexible and elastic, easy apposition.
·Application Scope: All LCD products (such as Computer or PC, Messenger Call, Mobile Phone and Pocket Computer)
四、Conductive Rubber Technical Parameters
<一>Product symbol and specification express method
YP double sides spong YS transparent sandwiching YPL single side spong YL four sides conducting L×H×W PITCH CW |  |
<二>Conductive rubber connector property
| CONDUCTIVE LAYER VOLUME RESISTANCE RATE | PV1≤6Ω·㎝ |
| INSULATED INSULATION RESISTANCE | PV2≥1012Ω·㎝ |
| MAX. USING CURRENT DENSITY | ≤2.5 Ma/mm2 |
| HARDNESS.SHAOSHI | 50-70A |
| USING CIRCUMSTANCES CONDITION | -45—150℃ +25℃85% |
<三>Tecnology parameter of conductive rubber connector
| Item | Unit | 0.05p | 0.10p | 0.18p | 0.25p | |
| Pitch | p | mm | 0.05±0.03 | 0.10±0.05 | 0.18±0.06 | 0.25±0.07 |
| Length | L | mm | 1.0～20.0±0.15 20.1～50.0±0.2 50.1～100.0±0.3 100.0～200±0.5 | |||
| Height | H | mm | 0.8～5.0±0.1 5.1～10.0±0.15 10.1～30±0.2 | |||
| Width | W | mm | 0.5～3.0±0.1 3.1～6.0±0.2 6.1～10.0±0.3 | |||
| Conduct width | TC | mm | 0.025±0.02 | 0.05±0.03 | 0.09±0.04 | 0.13±0.05 |
| Insulator width | TI | mm | 0.025±0.02 | 0.5±0.03 | 0.09±0.04 | 0.12±0.05 |
| Core width | CW | mm | 0.2～1.0±0.05 1.1～4±0.1 | |||
| Lines lope | ≤2° | |||||
| Remarks | In order to make the connectors work well, the compress limits of the connectors must be between 9.0%～15%, and the best compress value is 10%, touch press is bigger 20g/mm×length | |||||
