Dongguan Kotobo Industry Co., Ltd.

Full Shielded With Aluminum Or Copper Foil

Date：2024-05-29 浏览次数：261 次

Product Details

一、FFC Introduction
(1). Major Features:
A. Miniaturized, small and highly integrated manufacturing
B. Saving space
C. Simplified wiring procedure, simple connection
D. Saving labor cost
E. Good flexibility, agile application, folding

(2). Fields of Application: Suitable for signal transmission and internal wiring in such fields as printer, scanner, acoustics, MP3, Video player, computer, monitor, digital camera, video camera, fax, duplicating machine, TV set, etc.

(3). Customization Service:
① Traverse pitch ：0.5mm 1.0mm 1.25mm 2.0mm 2.54mm
② Traverse length ：15mm～Any
③ Traverse type：A、B、C、D、E、F、G

④ EMI countermeasure ： copper foil, aluminum foil, copper foil mylar, aluminum foil m ylar, conductive fabric, sliver paste treatment, wave absorber, etc.
mylar,

Type A

	Both contact terminals face same direction. Supporting Tapes are laminated to the film.
TYPE B

	Each contact terminal faces different direction, Supporting Tapes are laminated to the film.
Type C

	Both contact terminals face same direction,Supporting Tapes are laminated to the conductors.
Type D

	Each contact terminal faces different direction,Supporting Tapes are laminated to the conductors.
Type E
Type E	One end is stripped for soldering.
Type F
Type F	Extended Supporting Tape for further protection.
Type G
Type G	Both ends are stripped for soldering.

二、Flexible Flat Cable Specification


N=No.Of Conductors 导体芯数
MATERIAL 材料
Insulation 绝缘体	Flame Retardant Polyester(Color: White/Black) 阻燃性聚酯(白色或黑色)
Conductor 导体	Tin-Plated Flat Rectangular Copper Wire(1um TinMin) 镀锡平角线(镀锡1um以上)
Supporting Tape 保强板	Flame Retardant Polyester(Color: White/Blue) 阻燃性聚酯(白色或蓝色)
DIMENSIONS(mm) 尺寸	Pitch间距=0.5mm	Pitch间距=0.8mm	Pitch间距=1.0mm	Pitch间距=1.25mm	Pitch间距=1.27mm	Pitch间距=2.0mm	Pitch间距=2.54mm
Tolerance for Pitch,P 间距	±0.05	±0.08	±0.08	±0.10	±0.10	±0.10	±0.10
Total Pitch,Pt 总间距	0.5×(N-1) ±0.07	0.8×(N-1) ±0.10	1.0×(N-1) ±0.10	1.25×(N-1) ±0.15	1.27×(N-1) ±0.15	2.0×(N-1) ±0.15	2.54×(N-1) ±0.15
Total Width,W 总宽度	0.5×(N+1) ±0.07	0.8×(N+1) ±0.10	1.0×(N+1) ±0.10	1.25×(N+1) ±0.15	1.27×(N+1) ±0.15	2.0×(N+1) ±0.15	2.54×(N+1) ±0.20
Margin Width,M 边距	0.5 ± 0.08	0.8 ± 0.10	1.0 ± 0.10	1.25 ± 0.10	1.27 ± 0.10	2.54 ± 0.15	2.54 ± 0.2
Terminal Thickness,t 接插端厚度	0.3 ± 0.05
Strip Length,S 接插长度	2 to 6 :± 1 ; 7 to 10: ± 1.5
Supporting Tape Length,B 保强板长度	4 to 7 :± 1.5 ; 8 to 20: ± 2.0
Total length,L 总长度	20mm to 500M
Tolerance for Total Length,L 总长度公差	20 to 100 ± 2mm
	101 to 300 ± 3mm
	301 to 600 ± 5mm
	601 to 1000 ± 8mm

ELECTRICAL CHARACTERISTIC 电气特性
Rated Temperature/Voltage 额定温度电压	80℃/60V & 105℃/60V
Dielectric Withstanding Voltage 绝缘体耐电压	1.PH≥1.0间距AC 500V/1min, 各不相接触的导体应承受的电压 2.PH≤0.5间距 AC 300V/1min,0.5mA.各不相接触的导体应承受的电压
Insulation Resistance 绝缘体耐阻抗(MΩ)	Exceed ≥100MΩ 大于≥100MΩ
Conductor Size 导体尺寸(mm)	0.035*0.3	0.035*0.7	0.05*0.65	0.05*0.8	0.1*0.3	0.1*0.65	0.1*0.8
Conductor Resistance 导体阻抗(Ω/m)	≤2.2	≤0.94	≤0.63	≤0.53	≤0.7	≤0.35	≤0.27
UL Style/File No.UL 类别及档案号码	UL20798: 80℃/60V ; UL20861:105℃/60V ; UL2743 105℃/90V ; UL2643: 105℃/300V ; File No. 493399
Flame Retardant Test 耐燃性测试	UL VW-1

RELIABILITY TEST 可靠性测试
DESCRIPTION 说明	TESTING METHOD 测试方法			SPECIFICATIONS 规格
Conductor Resistance 导体阻抗	JIS-C-3102(at 20℃)			According to kinds of conductor resistance standard 根据各种规格导体阻抗标准
Insulation Resistance 绝缘体耐阻抗	DC500V for 1 min 分钟			≥100MΩ
Dielectric Strength Test 耐电压测试	Between Adjacent Conductors 相邻导体间	AC 500V-10mA/1Min AC 500V-10mA/1分钟		No Short Circuit 无短路

Characteristic Impedance 阻抗特性	TDR method 方法			100Ω±10Ω 针对LVDS的FFC系列，客户特别要求除外
Salt Spray Test 盐雾测试	Density :5% In Salt Water, Temperature: 35℃ ;Period :48Hrs			No Oxidation 无氧化
Continuity 通电测试	DC3V, 0.1mA			No open/short circuit 无开路及短路
Heat Resistance 耐热性	85℃/96Hrs 小时			Pass Insulation Resistance and Dielectria Withstanding Voltage test 绝缘体电阻及耐电压正常
Temperature Cycling Test 高/低温循环测试	-40℃--25℃--85℃--25℃ ORH 65RH 95RH 65RH With 5 cycles			Pass Insulation Resistance and Dielectria Withstanding Voltage test 绝缘体电阻及耐电压正常
Moisture Resistance Test 耐湿性	40℃,95%RH 相对湿度,96Hrs 小时			Pass Insulation Resistance and Dielectria Withstanding Voltage test 绝缘体电阻及耐电压正常
Folding Test 折线测试 0.035*0.7mmCU	0-180℃ Folding test 折弯测试			More than 20 times
Flexing Test 柔性测试 0.035*0.7mmCU	15mm radius 1000cycles/min. 每分钟1000回,25mm stroke伸缩距			Min. 100,000 Cycles 100,000回以上
Solderability 焊锡性	浸锡温度:350±10℃ 浸入高度:3mm			90% wetting 上锡 <0.5mm shrinkage 收缩
Insulation Film Elongation 绝缘胶纸延伸率	JIS K6732			> 60%
Insulation Film tensile strength 绝缘胶纸拉力	JIS K6732			>3.5kgf / mm2
Abrasion test 磨损测试	Φ0.5mm , 600g,60cycles/min. 每分钟60回			Min/10,000 cycles

Related Products